Spike series · SPIKE135

135kVA

Replaces the site genset for tower cranes and hoists: the battery absorbs the motor inrush a diesel would be oversized for.

Request a quote Download datasheet Back to series

Storage platform

SiC + liquid cooling

Rated energy: 54 kWh
Peak (10 s): 160 kVA
Rated current: 195 A @ 400 V
Response: <15 ms

Applications

Tower cranesHoistsPlacing boomsStatic pile driversDTH drillsMine elevators

One complete system

Everything in one cabinet.

Battery, power conversion, control and protection arrive as one engineered unit: place it, connect it, power up.

835 V battery

High-voltage pack rated for 4,000 cycles at 90% depth of discharge and 70% end-of-life capacity.

3rd-gen SiC inverter

<15 ms response with constant P/I/V control and Black Start capability for standalone operation.

Dual-side liquid cooling

Variable-frequency cooling holds cell temperature spread within 3 °C, extending cell life by up to 30%.

Site-proof connections

CEE and Powerlock interfaces in an IP54 enclosure with a C4 salt-fog rating for coastal sites.

Spike series containerised enclosure

The inrush

Peaks arethe point.

Lifting motors draw multiples of their rated current at start. The Spike 135 answers with 160 kVA for ten seconds and up to 231 A peak, then settles back to a steady 135 kVA, recharging from a small feed between lifts.

Peak (10 s): 160 kVA
Peak current: 231 A @ 400 V
5-min output: 145 kVA
Recharge: 30 kW · 3-ph

At a glance

Built for the site.

The physical details that matter for transport, placement and connection.

Weight

1,550 kg ±50

Dimensions

1550 × 1300 × 1600 mm

Enclosure

IP54 · C4 salt fog

Warranty

5 years

Available configuration

AC-DC fast charger (20-40 kW three-phase)
Three-phase fast charger for BESS units, used to recharge from grid or generator.
On-board charger (OBC), 6.6 kW single-phase
Optional single-phase overnight charger for Spike/Block series.

Datasheet

Technical specifications.

SPIKE135

Battery

Rated energy: 54 kWh
Rated voltage: 835 V
Voltage range: 728 – 949 V
Cycle life: 4,000 · 90% DoD & 70% EOL

AC input · charging

Single-phase power: 6.6 kW (optional)
Single-phase voltage / current: 85 – 264 V · max. 32 A
Three-phase power: Max. 30 kW
Three-phase voltage / current: 260 – 530 V (3P3W) · max. 40 A
Frequency: 50 / 60 Hz

AC output

Rated output power: 135 kVA
Apparent power (5 min): 145 kVA
Peak power (10 s): 160 kVA
Rated output current: 195 A @ 400 V · 162.5 A @ 480 V
Max. output current (5 min): 210 A @ 400 V · 175 A @ 480 V
Max. peak current: 231 A @ 400 V · 192 A @ 480 V
Rated output voltage: 400 / 480 V · 3L/N/PE
Frequency: 50 / 60 Hz
THDi: ≤3%
Power factor: 0.99 · −1 to 1

General

Dimensions (L×W×H): 1550 × 1300 × 1600 mm
Weight: 1,550 kg ±50
Input interface: CEE 32 A (1P3W) · CEE 63 A (3P3W)
Output interface: CEE 32 A · CEE 63 A (3P5W) · Powerlock 400 A
Display: 10-inch HMI
Communication: Dry contact · Bluetooth · Wi-Fi · 4G
Warranty: 5 years
Enclosure: IP54 · C4 salt-fog rating
Cooling: Liquid cooling
Operating temperature: −20 to +60 °C
Relative humidity: 10 – 95% non-condensing
Installation: Hoisting & ground fastening

Next step

Start with your load.

Share the load profile, duty cycle and site conditions. We will size the storage, charging feed and any generator pairing.